Kitepower Australia

Yeah I have a 9m that I can demo. Also have a 13m in Ultralite

We have a couple Blizzards here, it has to be re-named though because Ozone stupidly didn't check for Trademarks on this name from the Ski Manufacturer http://www.blizzard-ski.com/ who they actually know well and the GM uses Ozone kites in the snow haha Oh well, people make mistakes... It will be called SUB ZERO, re-released on Feb 1st. We have a couple rare Blizzards in store now

Have one on the way We also have a couple hyperlink ultralights coming too haha couldn't resist.

Sorry for the delay mate. We discussed merging the Frenzy and Summit when a heap of dealers around the globe got together in Switzerland for the OSKM (tough gig, i know) there was a general consensus that the Summit and Frenzy were competing against one another, with the Frenzy sprouting technology from the race kites and paragliders, yet nearly all the really good snowkiters were using summits... So we reached the conclusion that an entry level Access and an advanced (yet to be named) open cell snowkite was all that is needed to cover 90% of the snowkiters out there. The Blizzard looks great and but the timing of the release sucks for us, because snow season is over. I'll order in a couple, happy to put one into demo if there is interest. What size? 9m or 11m?

Not sure what gave you that idea... have stocked Slingshot for a decade. Where are you located?

Definitely over the top with the marketing.... but hey so is every single other brand. Seen Slingshots latest campaign?? Makes Ozones marketing seem vanilla. Have a 9m demo in Sydney if anyone wants to try and I believe Steve sent a 12m to Jason?

SOLD. Mods can update or delete thread?

Happy to take offers on any of these http://www.seabreeze.com.au/Classifieds/Kitesurfing-Kites/~v4ed7/2016-Ozone-R1.aspx

Unfortunately she has not been used in a while... Was Steve's buggy and has only really been used at stockton a couple of times. Libre Dragster V4A Stainless Camber Adjustement Axle Track Theres even a bum bag on the back with a make shift walk of shame line, some tape and a couple of seized pockets... who knows what could be in there! RRP on this was $4200.00 Asking $2200. Shipping definitely not included

They may have jumped the shark with this one, time will tell. I flew it up at kitesurfari FNQ, marginal winds with a 10m in a buggy and was very quick! Not as heavy to fly as the velocity. Didn't get to use on water because of the unusually light winds we had. Flying on the beach, the kite sat above you like a racing foil, to the point where i was worried it was going to fall on my head, but it was surprisingly stable up there. Their kite designer Pat was on the trip and told us that he spent a lot of time back and forth with their CAD programmer on this kite. They had to really work on the wingtips to get this thing to fly properly because of the high AR and also super flat centre section with very swept tips. They truly have created something in between a current high AR inflatable and foil kite. It felt nice to fly and should be a fun jumping kite, with great characteristics on a foil board, for those of you who don't want to deal with a foil kite.

It's screen printed so not much we can do there Texta or sticker over it if you must. I have a blue 11m R1 as well which has only been used 5-10 times $1850.00

These are Jordans race kites that he has had for a full season. In excellent condition, no repairs at all. These kites also currently hold the NZ national race title for the 2nd year in a row All kite only 7m - $1350 11m - $1750 17m - $2000 Shipping in Australia - FREE! Overseas just ask me for a quote.

Planning a small rev order order soon if anyone wants something specific, just shoot me an email or message.

Damn expensive with less margin for retailers as well... Have ordered a 10m and 15m for our race team rider Jordan. Plus a 10m for the shop (myself) if anyone wants to try it out.

Interesting, I was confused for a while until I noticed this one is battery powered to heat the water... The original ones we have can be filled with warm/hottish water and if you leave in your car in the sun, you will certainly have a pretty hot shower relative to your body temp when getting out of the water. Wonder how much weight it adds.

Have some foils to clear! Giving you guys first bite. DP Power 2.5m Complete - $100 NEW Method 2.3m Kite Only - $220 NEW http://www.kitepower.com.au/ozone-method.html Yakuza GT 5.5m Complete w/ Ozone composite handles and climax lines. $380.00 - USED, very good condition, just a bit of sand. Also have the following Yakuza GT brand NEW, Kite Only 3.0m - $320 (2 left) 4.5m - $370 (1 left) Shipping on any of these will be $15 - $35 depending where you are and how fast you want it cheers, Peace 02 95296894

Sorry mate, totally out of buggy Seats. Can order a deluxe seat with our next order but you are looking at around $140 - $150 edit - Franken buggy SOLD!

Hey mate. 160mm between forks 85mm for the steerer. Have two XL seat harnesses left

updated sold items.

Really? it was very high AR and closed cell... what is the vegas going to be?

After doing a very thorough stocktake, found a lot of bits and bobs that are getting old or just not wanted any more (or have too many) See pics a descriptions below. Shipping not included in prices. WALL PHOTO 1. Peter Lynn Gigastrong axle - $125 - SOLD 2. Quad wheel buggy adapters - $100 (for both) 3. Libre Fork bigfoot light type II 12mm axle, stainless - $100 (ordered incorrect fork for customer) 4. Peter Lynn swivelling spreader bar - $20 5. Ozone helmet bag - $15 - SOLD 6. Peter Lynn foot pegs - $30 per pair (no idea why we have so many) 7. Libre arminator spreader bar, last one - $80 - http://www.kitepower.com.au/libre-arminator.html 8. Peter Lynn walk of shame strap - $10 - SOLD 9. Peter lynn axle pouch - $5 each - SOLD (both) 10. Climax 350/350dan x 20m quad lineset (overkill for landkiting...) 11. Libre deluxe harness XL - $70 each Random shifters - ??? FLOOR PHOTO 1. Peter Lynn Rim Assymetric 8 x 7 Off Set inc 20mm bearings - $100 each 2. Used PLynn footpegs - $15 - SOLD 3. Font axles with spacers - $30?? 4. see #7 5. Big foot inner tube - $30ea 6. Random flexifoil ankle leash from mountainboard - $5ea 7. Sideframe padding pair, plus one cover (#4) not sure where the other cover is $25 8. used Pro Limit spreader with wichard 90mm snap shackle - $60 (shackle is worth $119 new) 9. DP alloy quad handles - $15 10. Standard buggy inner tube - $15ea 11. Mystery bag of stainless spacers collected over the past 15years or so from different fork and wheel combos - $1 per spacer? i don't know. BITS BOX - not going to list what is in here but if you think there is anything you might need, give us a buzz and I'll run upstairs with the callipers and give you measurements. Finally - I had enough parts to make a frankencompmkII buggy - $800 - happy to put the giggastrong with it for an extra $50 too. - SOLD Oh and i almost forgot about this guy! Will only fit the super old smaller PLynn axles that everyone used to bend It's a tandem buggy coupler - $15 Reply to thread of give the shop a call 02 95296894 and ask for Peace, the other guys here will give you lots of umms and ahhs if you ask too many questions about some of these relics Also happy to hear offers if you think my pricing is off. I will update this thread when products are sold. Cheers.

I think it's one of these masterpiece series by Elliot Shook - http://www.revkites.com/masterpiece-kite-artist/eliot-shook was considering getting one in until I saw the price, a standard SLE demo will be fine

My mistake, you are right. I thought it was the Matrix and Vector which had the same axle. Its the ATS and Vector which do. We have 9.5mm x 28mm bearings too

We have these in stock. Vector trucks with twistar hubs are 12 x 28mm. If you haven't sourced them already

Saw these in Switzerland at OSKM, in vibrant colours too! Looked nice but definitely still in the prototyping stage.