Bunny87 Posted September 10, 2012 Report Posted September 10, 2012 Nice one Ady, thats really good news mate. Look out for me on the common as i'm likely to be there over the weekend. Must stay local as the Pembrey trip used my current stock of browny points. Pembrey was awesome mate mile of the biggest (kiteable) beach you could set your eyes on! The guys are still there but Ryan and I came back today. Great weekend and we topped 30mph on the board. I've got the bruises on my arse and back to prove it! The wind really picked up and we were whipping out all over the place. Both Dave and Ryan had meaty falls colisions with the sand. Daves at high speed, breaking (luckily only)his glasses in the process. Quote
Chaos Posted September 11, 2012 Report Posted September 11, 2012 3 good bits of good news Ady, great stuff. Hope you are back flying asap Quote
midlandtony Posted September 12, 2012 Report Posted September 12, 2012 be great to see you back on the common ady, glad to hear you guys had a blast at pembrey. Quote
Bunny87 Posted September 12, 2012 Report Posted September 12, 2012 Got to do Pembrey again soonish! Quote
Chaos Posted September 13, 2012 Report Posted September 13, 2012 Well its approx. 3 1/2 hours till I'm there again => Quote
tvrgreg Posted September 16, 2012 Report Posted September 16, 2012 well done on the job ady, just got back from pembrey great week kiting broke my pb its now 37mph with me 3.5m butane got 36mph out of the 4m flow well chuffed. need to brake 40mph barrier next Quote
midlandtony Posted September 17, 2012 Report Posted September 17, 2012 Good going Greg, sound like you've got the need for speed. Did you manage to get out on the sprints? Soooo gutted i couldn't get down. Had a bit of a thrash around on the common yesterday, wind was not too bad. Quote
Chaos Posted September 17, 2012 Report Posted September 17, 2012 Hi Tony, I am looking for a long socket to tighten up my nuts with, think its 30mm, have any suggestions of where I can get one from. I used the buggy as well as a board on handles, didn't go captive, that need's to change next time I get to a beach And yes, you did miss an awesome session, next time? Quote
Chaos Posted September 17, 2012 Report Posted September 17, 2012 Hi Tony, I am looking for a long socket to tighten up my nuts with, think its 30mm, have any suggestions of where I can get one from. I used the buggy as well as a board on handles, didn't go captive, that need to change next time I get to a beach And yes, you did miss an awesome session, next time? Quote
midlandtony Posted September 17, 2012 Report Posted September 17, 2012 A cold shower will probably tighten you nuts and a 30mm socket will tighten the ones on the buggy. lol. Once you go captive you will not go handles on a beach again. Quote
Chaos Posted September 17, 2012 Report Posted September 17, 2012 But . . . . I need the length. The one you have, thinking about it, looks about 10 cm long, when I used Greg's the socket was only on about 1/2 of the nut when tightened, the thread of the axle fouls the socket. Quote
midlandtony Posted September 17, 2012 Report Posted September 17, 2012 ebay number 221057491764, 30mm deep impact socket should do the trick. Quote
midlandtony Posted September 17, 2012 Report Posted September 17, 2012 No problem, I did not ask what drive ratchet you have, just make sure its correct for that socket. Quote
Chaos Posted September 17, 2012 Report Posted September 17, 2012 Was going to use a car wheel extending bar, used Greg's to great effect, long for tightening and collapsed for winding up on the thread. Will measure the sizes up tomorrow and use the phrase 'deep' if I search anywhere else. Wind was very lumpy with strong channels at Cleeve Sunday, put a few hours in at the Common Sat PM. When is the first race? I believe it's being held at the Ho, must travel down to watch a race or 2. Quote
midlandtony Posted September 19, 2012 Report Posted September 19, 2012 27th and 28th October is the first race at Westward Ho, havent flown there yet. Quote
tvrgreg Posted September 19, 2012 Report Posted September 19, 2012 hi tony cannot see page 165? so checked your posts, did not fly the sprints all week wind was high most days 20-25+ so stuck with 2.5m century, 3m flow, 3.5m butane and 4m flow. 1st obe was on 3m flow straight out of the back no pain, 2nd obe was on 2.5m century sort of out the back across the axel hit legs on the way out and got hurt, did not get up for 5-10 mins. they say its the small ones that will spank you the most got 36mph out of the 4m flow and 37mph on the 3.5m butane well chuffed but got to crack 40mph this year. hope to get along to the ho to see you race in oct. Quote
midlandtony Posted September 21, 2012 Report Posted September 21, 2012 Be good to see you down there. Have to bring your kit, just incase ;-). Looks like no wind this weekend, so need to get some practise time in. Quote
Chaos Posted September 21, 2012 Report Posted September 21, 2012 Got a socket of the bay with 1/2 drive, thanks Tony. Maybe going to Cheltenham on Sunday. Quote
midlandtony Posted September 21, 2012 Report Posted September 21, 2012 whats it like with an ESE wind? from what i can see 9 to 15mph wind. Quote
skipperoo Posted September 21, 2012 Report Posted September 21, 2012 It's still a little lumpy but nearly one of the nicer directions up there Quote
midlandtony Posted September 21, 2012 Report Posted September 21, 2012 Cheers skip, i might try and get an away day. Quote
tvrgreg Posted September 21, 2012 Report Posted September 21, 2012 hey tony well up for practice sessions let me know when your planing a trip need plenty of practice myself. Quote
skipperoo Posted September 21, 2012 Report Posted September 21, 2012 Cheers skip, i might try and get an away day. Be cool to see you up there again, just try and avoid the naughty corner this time Quote
midlandtony Posted September 21, 2012 Report Posted September 21, 2012 Defo, not been up since I broke my ribs and with only 5 weeks to go wont be takin any chances. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.