Jump to content

Recommended Posts

Posted

To fix this problem is it just a case of joining the two edges whilst bladder deflated with a patch, then inflating bladder and strenghening the join?

 

Help appreciated.

 

I have repaired puctures before but a mate has gotten himself a tear so a little stumpped.

 

Cheers

D3.

Posted

The tear is 2 inches. Its a little to big to inflate the bladder first - which is what i would do with a puncture. Worry is around fixing it, inflating it only to find the bladder has addtional stress points around the patch :(

Posted

The thing about a sticky patch is that as soon as the kite is inflated, every part of the bladder is pressed against the leading edge tube so its can't come off. If you are gonna stick it, make sure you clean it with a solvent prior to stickingness.

Posted
If it's only a couple of inches this will sort it:

 

KiteFix Ultra-Adhesive MONSTER Bladder Patch

 

It's a giant self adhesive patch, just cut it to size.

 

Make sure you lay the bladder really flat when you apply it, and overlap by at least an inch on the good bladder material.

 

In my experience it works a charm. You can find them on eBay.

 

and if you do trim it make sure you round the corners.

Posted

Be very careful not to stick both sides of the bladder together through the tear and take care to insure that the bladder is completely flat before sticking the patch.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...