Axis

Go to the Apple store when you get a good price as they will price match and the service is great, got one for the GF @ weekend just the 2 as did not really need the better camera and there is not a huge difference between the screen resolution. hope this helps and 2nd that on the hot spot thing works a treat

It's not bad low tide is around 13:00 I believe an NE, you get a collection of water in places and if you head to the right when you walk down from the lifeboat shed it is quieter for bugging. I would come up as just got back after being away for 4weeks (work sucks) but buggy in for mods and other stuff on, hope to get up during the week, enjoy. Rob

2nd that on the fairy liquid I put the rim on a small box which helps, I did use a paint tin but I had visions of paint going everywhere I also remove the valve from the tube if you have tube's I also warm the tyres up which helps I use her hairdryer but I make sure she does not no;) best of luck mind them knuckles

the measurement for the O.D of the bearings was wrong, I wanted to know what size would you machine the bore of the spacer to suit the bearings 32mm O.D.

I am thinking of doing this to my headstock found the bearings which are HK2526 x2 + HK2512 x1 (Total of 64mm length of spacer) was wondering if any one knows the internal Dia. to machine the spacer. I have asked the bearing company and was told the tolerance on these bearings are N6 Not to sure what this means I was thinking of machining them to 36.05mm + 0.05mm - 0.0mm any help appreciated Rob

PM sent about Barrows

I am interested in a couple of your rage's I have sent you a PM

Head for Gorleston Cliffs I think it is sign posted there is loads of free parking, head for the kids pirate ship then walk down under the bridge. This is where most people set up Rob

Very good seller, appreciate coming all the way to Gorleston and the bonus pump. hope not to long till you see me on the water (falling off probably) Cheers Rob

Thanks again for that hope you get your other one repaired Just need a board and a few lessons and I will be away

Would like some advice on this pump I have seen on eBay Bravo Stirrup Pump with Easy Glide Aluminium Shaft NEW | eBay It is a Aluminum one but has no pressure gauge I believe Cheers Rob

Go for the S/S ones

How about trying a extra washer either size of the bearings

I also would like to know what people think of the Midi's as I would not need to get any fabricated parts. With regards to some of the fabricated parts a local friend specializes in S/S so was wondering what thickness to go for with regards to forks and downtube

Well there is a couple on ebay a cameleon pogona and also a barracuda all have the bigfooots for running on soft sand I think to upgrade with new parts for the PL would be around the £300 mark roll on pay day.