Jump to content

Robocourier

Members
  • Posts

    494
  • Joined

  • Last visited

Everything posted by Robocourier

  1. Ozone Leash Stainless spring clip one end, top hat release the other. Neoprene covered elastic. £13 in the post to mainland UK
  2. I was trying to be a bit more subtle than that.
  3. If anyone left an unattended kite in a rucksack around here, the Bomb Squad would come and defuse it.
  4. Sold, subject to payment.
  5. Don't go down the "assemble, disassemble" route. You'll hate yourself for it; biggest PITA ever. I ended up getting two Flexi buggies, one standard, one wide axle, to avoid that. And a van where I could fit them double decker style. All I had to do was take the wheels off and that was irritating enough.
  6. Well what did you want it to say? Hello Moto??
  7. For Sale: 2010 Ozone Access XT 4m. Red/White/Gray I'm selling my 4m Access as kite only but am including a bar/line set for free. The kite is in very good used condition and has been used for buggying. It is undamaged/ unrepaired/ and pretty much unmarked. Still has some crispiness and has always been cold water washed after trips to the beach or muddy field outings. Being the 4m it is small enough to be and, has always been, dried at room temperature and never packed away wet. The bridle is undamaged but the leaders are showing signs of fading from being washed. The decals have peeled in places. The Ronstan pulleys run freely and smoothly. It comes with the original Ozone compression strap, unused repair kit and undamaged Ozone bag. I'm including a bar/line set. This is not the original Ozone kit. I bought it off this Forum and, to be honest, wasn't the best purchase I've ever made on here. The bar is 44cm rather than Ozone's 54cm one. It has Ozone's Megatron/ depower set up with a set of ratty lines attached. I've flown a 4m Access on it and while the shorter bar works OK, the kite flew like a dog. Closer inspection shows that the lines are f*cked (basically). The Megatron loop covering is also failing. That's why it's free. You can either replace the lines to make a good back-up, or salvage some parts from it, (or stick it all in the bin). I'm selling this as I've just bought Flowlovva's XT (primarily for the original bar/lineset), which turned out to be a minter, so I'm keeping it all (plus I fancy a blue one). Therefore I'm selling this one on. It's been a truly immense high wind kite; fast and powerful when you need it but with huge depower to keep you safe. If you like to fly inland in gusty conditions this will keep you in the buggy in gusts of up to 45mph. On the beach I've hit 50mph with it. I always try to describe accurately, as those who have bought kites from me on here will confirm, but if you want anymore info or pics please ask. Asking £140 posted or £125 if you come and get it. Bank transfer (no Paypal), cheque or Cash on Collection. I'm a mile off M1-J10A. http://i1199.photobucket.com/albums/aa469/Robocourier/4m%20Access%20XT/IMG_0428.jpg Full set of pics here: http://i1199.photobucket.com/albums/aa469/Robocourier/4m%20Access%20XT/IMG_0428.jpg http://i1199.photobucket.com/albums/aa469/Robocourier/4m%20Access%20XT/IMG_0432.jpg http://i1199.photobucket.com/albums/aa469/Robocourier/4m%20Access%20XT/IMG_0433.jpg http://i1199.photobucket.com/albums/aa469/Robocourier/4m%20Access%20XT/IMG_0434.jpg http://i1199.photobucket.com/albums/aa469/Robocourier/4m%20Access%20XT/IMG_0431.jpg http://i1199.photobucket.com/albums/aa469/Robocourier/4m%20Access%20XT/IMG_0430.jpg http://i1199.photobucket.com/albums/aa469/Robocourier/4m%20Access%20XT/IMG_0429.jpg http://i1199.photobucket.com/albums/aa469/Robocourier/4m%20Access%20XT/IMG_0424.jpg http://i1199.photobucket.com/albums/aa469/Robocourier/4m%20Access%20XT/IMG_0423.jpg http://i1199.photobucket.com/albums/aa469/Robocourier/4m%20Access%20XT/IMG_0440.jpg http://i1199.photobucket.com/albums/aa469/Robocourier/4m%20Access%20XT/IMG_0426.jpg http://i1199.photobucket.com/albums/aa469/Robocourier/4m%20Access%20XT/IMG_0435.jpg http://i1199.photobucket.com/albums/aa469/Robocourier/4m%20Access%20XT/IMG_0438.jpg http://i1199.photobucket.com/albums/aa469/Robocourier/4m%20Access%20XT/IMG_0436.jpg http://i1199.photobucket.com/albums/aa469/Robocourier/4m%20Access%20XT/IMG_0437.jpg
  8. For Sale: 2010 Ozone Access XT 4m. Red/White/Gray I'm selling my 4m Access as kite only but am including a bar/line set for free. The kite is in very good used condition and has been used for buggying. It is undamaged/ unrepaired/ and pretty much unmarked. Still has some crispiness and has always been cold water washed after trips to the beach or muddy field outings. Being the 4m it is small enough to be and, has always been, dried at room temperature and never packed away wet. The bridle is undamaged but the leaders are showing signs of fading from being washed. The decals have peeled in places. The Ronstan pulleys run freely and smoothly. It comes with the original Ozone compression strap, unused repair kit and undamaged Ozone bag. A full set of pics are here. http://i1199.photobucket.com/albums/aa469/Robocourier/4m%20Access%20XT/th_IMG_0428.jpg I'm including a bar/line set. This is not the original Ozone kit. I bought it off this Forum and, to be honest, wasn't the best purchase I've ever made on here. The bar is 44cm rather than Ozone's 54cm one. It has Ozone's Megatron/ depower set up with a set of ratty lines attached. I've flown a 4m Access on it and while the shorter bar works OK, the kite flew like a dog. Closer inspection shows that the lines are f*cked (basically). The Megatron loop covering is also failing. That's why it's free. You can either replace the lines to make a good back-up, or salvage some parts from it, (or stick it all in the bin). I'm selling this as I've just bought Flowlovva's XT (primarily for the original bar/lineset), which turned out to be a minter, so I'm keeping it all (plus I fancy a blue one). Therefore I'm selling this one on. It's been a truly immense high wind kite; fast and powerful when you need it but with huge depower to keep you safe. If you like to fly inland in gusty conditions this will keep you in the buggy in gusts of up to 45mph. On the beach I've hit 50mph with it. I always try to descibe accurately, as those who have bought kites from me on here will confirm, but if you want anymore info or pics please ask. Asking £150 posted or £130 if you come and get it. Bank transfer (no Paypal) or Cash on Collection. I'm a mile off M1-J10A.
  9. For Sale: 2010 Ozone Access XT 4m. Red/White/Gray I'm selling my 4m Access as kite only but am including a bar/line set for free. The kite is in very good used condition and has been used for buggying. It is undamaged/ unrepaired/ and pretty much unmarked. Still has some crispiness and has always been cold water washed after trips to the beach or muddy field outings. Being the 4m it is small enough to be and, has always been, dried at room temperature and never packed away wet. The bridle is undamaged but the leaders are showing signs of fading from being washed. The decals have peeled in places. The Ronstan pulleys run freely and smoothly. It comes with the original Ozone compression strap, unused repair kit and undamaged Ozone bag. A full set of pics are here: http://pic.photobucket.com/share/icons/embed/btn_geturs.gifhttp://pic.photobucket.com/share/icons/embed/btn_viewall.gif I'm including a bar/line set. This is not the original Ozone kit. I bought it off this Forum and, to be honest, wasn't the best purchase I've ever made on here. The bar is 44cm rather than Ozone's 54cm one. It has Ozone's Megatron/ depower set up with a set of ratty lines attached. I've flown a 4m Access on it and while the shorter bar works OK, the kite flew like a dog. Closer inspection shows that the lines are f*cked (basically). The Megatron loop covering is also failing. That's why it's free. You can either replace the lines to make a good back-up, or salvage some parts from it, (or stick it all in the bin). I'm selling this as I've just bought Flowlovva's XT (primarily for the original bar/lineset), which turned out to be a minter, so I'm keeping it all (plus I fancy a blue one). Therefore I'm selling this one on. It's been a truly immense high wind kite; fast and powerful when you need it but with huge depower to keep you safe. If you like to fly inland in gusty conditions this will keep you in the buggy in gusts of up to 45mph. On the beach I've hit 50mph with it. I always try to descibe accurately, as those who have bought kites from me on here will confirm, but if you want anymore info or pics please ask. Asking £150 posted or £130 if you come and get it. Bank transfer (no Paypal) or Cash on Collection. I'm a mile off M1-J10A.
  10. Complete or k/o? If complete are they original Ozone bar/lines without the clamcleat??
  11. Peter, any flying on the agenda over Christmas?
  12. Mick, he might be a carpenter that flies kites, so he might be on the forum? I'm a van driver that flies kites and yet I'm on here?
  13. Wow, that's pretty cool. Especially the bit with the fit blonde doing that thing with her hair. Mick hasn't commented so he obviously lost interest before that point. It's at 1:25 to save you trawling, Mick.
  14. What do you do? Workwise, that is?
  15. As above really. I don't kitesurf but the one I used on a helmet only came off when I buried my head in the sand in a buggy crash. Prep the surface by making sure its clean and warm. Also, using a curved mount, make sure the mount is warm too, to soften the adhesive so all the glue makes contact. Once stuck wait for 24 hours to ensure its well stuck, then go out to play. In your case, a secondary cable tie 'leash' would be sensible to, say, a goggle clip (if your helmet has one), as a precaution.
  16. Who else clicked on the top vid and when it got to the ad was offered 'Pre-Paid Funeral Plans'?? Now that really is targetted marketing.
  17. As per title. As new. £5 in the post.
  18. It was obviously a scam, 820 is far too expensive for a year old M3.
  19. It was obviously a scam, 850 is far too expensive for a year old M3.
  20. No worries. I trust you got it all sorted. It's taken me 2 months to get around to listing it!
  21. 25th September to be precise. I was replying to your thread about having this for sale. "Ted Work out what you were looking at spending on this and pm me. I have a braced rear axle c/w 20mm hubs/stainless bearings/bolts, tyres, etc sitting on a flexi buggy that I don't really use. I don't do jumping, so its in perfect shape. I also have the original axle set up so selling is an option if you're interested." Still waiting for a reply too!! Lmao.
  22. 25th September to be precise. I was replying to your thread about having this for sale. [i"]Ted Work out what you were looking at spending on this and pm me. I have a braced rear axle c/w 20mm hubs/stainless bearings/bolts, tyres, etc sitting on a flexi buggy that I don't really use. I don't do jumping, so its in perfect shape. I also have the original axle set up so selling is an option if you're interested." [/i] Still waiting for a reply too!! Lmao.
×
×
  • Create New...