Jump to content

Recommended Posts

Posted

my kites broke i got a 3.5m rebble was happily in the air then came down to the ground with a sudden bump. looked at my kite and found that where the brake likes attatch to the kite. (the bit where it fans out) have ripped out from the kite. Is it worth repairing or can it b repaired. Will post pics soon

Posted

I fixed a 2.5m Rebble, it was in 1/2 when I got it, I mean two pieces, most of the bridle had ripped out of one half of the wing, and had rips top & bottom + some rib dammage.

 

It was a challenge to put back together, but it is still going after a year, and I even had my fastest speed on the bug with this kite 42 mp/h.

 

So, with a bit of time and effort, yep you can repaire a kite.

 

Shrimpo

Posted
thats whats happend to mine, how you repair it. did you have to stitch it in

 

most of the bridle attatchment tapes that fit between the cells had ripped out, some were just U/S, so had to be replaced, others were OK.

 

Un-stitch the section where the tape had been, you will find a little marker hole (about 2mm) in the material, this is the center of were the tape should be.

If the tape is OK, I put it back, and stitched it in with a few runs, make sure you run the stitching a fair way past the tape point.

Some of mine required sail tape adding to the ribs, as they had ripped as well, get it from a boat shop, or powerkite shop.

 

Shrimpo

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...