1.Roll kite downwind
2. close deflate zipper and open inflate, stand there holding zip open until inflated.
3. Close inflate zipper.
4. Lay out lines upwind at a 60 degree angle away from the kite.
5. Walk through lines to ensure they detangle (remember red lines left, grey on the right)
6. Attach leading lines first (top pigtails)
7. Attach back lines
8. Hook up to your harness ensure the sheeting is all the way in (zero power)
9. Walk back and put a little tension in the lines, then pull the leading line furthest away at the top end of the kite and the kite should start to curl up and slowly launch as you walk back.
That's the set up and launch procedure in a nut shell, now here's step 10
Whack up the power, jump on a board and get some air!!!
Hope this helped a little, have fun and stay safe!