Jump to content

Recommended Posts

Posted

I had a look on RC Guards website and then decided to have a go at making one- made a cardboard template then cut it out of a plasctic 5 gallon drum.

 

I run it in the winter when the beach is wet works a treat will find some pics and post up later

  • Replies 168
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Posted
Had my RS a week or so and looking for a front mudguard. People are saying that RC are doing really nice ones but when i look on there wedsite they say nothing about doing a RS. I E mailed them and they asked if it was like a flexi.

Let me know what the reply is. i might be in the market for one myself.

Thanks

Tony

Posted
Had my RS a week or so and looking for a front mudguard. People are saying that RC are doing really nice ones but when i look on there wedsite they say nothing about doing a RS. I E mailed them and they asked if it was like a flexi.

I have a stanard barrow wheels all round and would love to know if anyone has got one.

Is the front end of a RS the same as a libra?

 

When I bought my RS I was told it was a copy of the Libre Special. A pm to Maverick440 will get you the answer you need though.

Posted

Here is one I made earlyer for my first RS

http://i36.photobucket.com/albums/e25/Maverick440/IMG_2385.jpg

 

Ive also got a wider version fitted to my current Super RS. Its a modifyed version of the one I made for my V-flex two a few years back, but nobody was intersted when i tryed to sell them so I never made any more molds for the narrower gaurds.

http://i36.photobucket.com/albums/e25/Maverick440/DSC00016.jpg

http://i36.photobucket.com/albums/e25/Maverick440/DSC00015.jpg

 

The front end of the RS is diffrent from the Libre in that is designed around the Midi tyre as opposed to the normal Barrow tyre. This gives a wider fork, so a normal guard wont fit. (also the fork legs are longer)

Posted

I,ve just discovered that I,ve owned an RS for about 3 years (I think) Check Photos. The Bloke I bought it off never knew what it was. It must be about 5 years old (Are RS this old ??) Its morphed into a Libre lookalike over the years - its got Mavericks old forks and Swan neck fitted a libre seat and rear axle. Its a bit like Triggers brush - only the side rails to swap now. It does have 2 modes though - barrow with original rear axle and forks and Bigfoot lights - wider rear axle and front forks. The only issue I had was the seat was a bit crappy but for the price you carn't complane. I wore it out so had to replace it with a used libre one. Remember that I had an old seat the new ones look much better

 

Superb buggy in any setup

 

http://farm1.static.flickr.com/32/58481903_7b2bd53f11_b.jpg

 

http://farm1.static.flickr.com/32/58481943_ff60b96cfd_o.jpg

 

http://farm1.static.flickr.com/32/58481941_4e0838b4d8_o.jpg

 

http://farm1.static.flickr.com/26/58481940_d116fbb9b7_o.jpg

Posted

Yep thats a very early Mk1 RS, the original seat's were poor to say the least, the new seat (Mk3) is a far better item....................:)

 

Dont remember selling the forks and swany unless they were the original forks and swany of my V-flex, before we fitted the suspension forks?

Posted
Yep thats a very early Mk1 RS, the original seat's were poor to say the least, the new seat (Mk3) is a far better item....................:)

 

Dont remember selling the forks and swany unless they were the original forks and swany of my V-flex, before we fitted the suspension forks?

 

yes they where bright orange and off your 2 seater monster if I remember rightly, you had fitted suspension in there place.

 

Good to know the buggys origin as I,ve been puddled as to who built it, I knew it wasnt Libre and the quality was too good for it to be homemade.

I posted here when I first got it but nobody could ID it.

 

Could you guess the year of manufacture ?

 

If anyone fancys starting a RS musium I,ve still got all the original Parts !!

Posted

Well if my old memory is correct I took delivery ofthe V-Flex in 2004, so the RS is I would say prob 2003 vintage.

 

I remember driving back up the M6 after just selling my Dragster (no not libre) thinking Ill order a V-flex now...............LOL

Posted

Hi guys,

 

Been thinking abut buying a starter buggy and been looking at the RS. A few questions. What is the benefit of the Swan Neck and what is the benefit of the wider axle? I used to kite a lot but have been out of the game for a couple of years. Turning into a fat *******, so figure it is time to get out and do some exercise!

 

Tony

Posted

Basically the wider axle adds greater stabilty to the buggy making it into a cruiser rather than a frrestyle buggy.

The swan neck lowers the buggies centre of gravity and again helps with stability. However in standard form the RS is a great buggy

Swan necks , deli midis and varying axles are really down to your personal preferences. I would recommend a back rest as this improves comfort no end -hope this helps

 

As has been said on here many times the RS is a great buggy for the price

Posted
Basically the wider axle adds greater stabilty to the buggy making it into a cruiser rather than a frrestyle buggy.

The swan neck lowers the buggies centre of gravity and again helps with stability. However in standard form the RS is a great buggy

Swan necks , deli midis and varying axles are really down to your personal preferences. I would recommend a back rest as this improves comfort no end -hope this helps

 

As has been said on here many times the RS is a great buggy for the price

 

Comes as standard now with the backrest. if you have the money get your upgrades now, with the buggy, as they are cheaper than if you get them in the future

 

Tony

ps owned an RS for a year now and has never let me down. solid bit of engineering.

Posted

Good stuff. I thought the back rest came as standard these days? I've just bought a Rage 4.7 off eBay and was trying to find a good buggy to learn and cruise about in. I'm not really looking for a trick buggy, rather a cruiser, so what would you say would give me the best band for the buck? An RS standard with a 1.5m axle? Or would the swan neck be a better investment? Or both? So hard to know!

 

Cheers guys

 

Tony

Posted

i got mine with the deli minis and find them a good all rounder(grass and beach). didn't bother with the swanny tho. Standard Axle is good for just cruising. Long axle will be if you wanna push it a bit and if you can transport it ok. On the standard axle i was able to put the buggy, minus the rear wheels, inside my vectra estate.

If you can afford it go the whole hog, you will be getting good value for your money but if not then the only thing i would recommend is the midi's.

hope that helps.

Tony

Posted

Heya guys,

 

Got in touch with Ralf and in the end went for an RS Light with the standard neck, standard tyres and a 1,35 axle. Figured that might be the best mix for the price. The 1,50 would make it very tough to transport in my Peugot 306!

 

What are your thoughts? Apparently I will have it sometime during the week 14-18th.

 

Tony

Posted

Yeah, having read this forum I'm already semi prepared for this! Oh well, I am still waiting for my Rage so it's all good! Plus its so fricking cold at the minute, could do with warming up before I start whizzing around!

 

Cheers guys

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...