Jump to content

Recommended Posts

Posted

Standard bike speedo's from halfords and argos can be used in bith the wired and wireless form.

 

Fitting the magnet can be done by boring a small hole through the plastic wheel or securing it with a silican sealant type thingy.

 

I have a 9 function wirless one from halfords. Standard wheel are ok. Calibration lists within the packet dont show that you can set it to such a small wheel diameter but it is possible. Mine is set to 1280mm on a 16" tyre.

Posted

Thats an interesting question. A post was made for everyone to list kite buggy wind where and speed in a buggy. This was quite a few weeks ago now.

 

Then I had 27mph. That was in a rough park. IT FELT FAST!!

Now I have done just under 40 on a beach and it didn't feel as fast.

My park run was with a blade 4.9 and the beach run was with a rad sail 3m.

Posted

For the most accurate speed you need to measure your wheel circumference (the number required by most speedos) as the level of inflation affects the circumference.

 

I've only managed 34mph with both my 4m Blade and my 2.5m Razor - but my speedo is set at 1220mm for 16" wheels!!

Posted

This one seems to have lasted longer than most.

A good few months beach use and still going strong.

No buttons on the front to clog up with sand either.

 

Argos Cat.No. 333/2036 Price £9.99

 

Drill hole in wheel and screw through into magnet.

Mine's never budged.

 

Cheers Bob.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...