ok first go to your local thrift store and buy a pair of old skis, then go and get a pair of every day black work boots with decent traction and the rubber stickes out further than hte toe and heal of the boot (thats if you dont hve one alredy), then take 2 2x4s and make a right angle by connecton one to the other, then tack off the bindings on hte ski(the things that hold you foot in place) , then place the ski agenst the right angle having one side flush agenst the 2x4 and to toe or "tip" of the ski agest the other , now take a tape measure and measure out from the "tip" of the ski 8'' /eight inches of the 2x4 the tip of the ski is touching, after measureing 8'' place a dot with a sharpy "perment marker" in hte middle of the ski 8 inches back from the tip, now line up the "boot toe" binding (the one that doest clip down) the tp center screw hole "thare should be 3 of them " on the dot , now gently screw it down but not tight (you may have to start a piolt hole), once youhave the top screw in place measure the sidesof the binding evenly from the edge and screw in hte last 2 screws of the toe binding, ok thats the first part the nextplace the boot on the sky in the toe binding , then take the back binding "clamp down" and make it flush up agenst the back of the boot (have the binding in he middle of adjustment so you can be a little off and itghten ot loosen it later) once you have it flush agenst the back of the boot try to make it even space on the right and left side of the bnding then screw it in (this binding should have 4 screws) ,, now from the back of the rear binding measure 3 to 5 inches (if youlike to have somone ride the ski with you then longer the better but more friction the slower you go ) then cut off the excess of the ski a abnd saw works best , ok VERY INPORTANT only make ONE SKI AT A TIME so if you screw up you can fix it with the other one , nad an nother tip becare full while screwing down hte binding so you dont srew through the ski with the screws if you do just simply cut them off with a grinder.
thanks it the work boots are best beacuse thay provide the best foot confort and ankle support with out emobelizing yur ankle so youdone break it ,
all viewers plz make and try skys at one risk you can get prity fast speeds and can be dangerous so plz ski at your own risk.
thats it guys plz wright back the detales .
GIT:cool: